Audio Technica AT-LPW30BKR Fully Manual Belt-Drive Turntable 33/45 (Mahogany)

Audio Technica AT-LPW30BKR Fully Manual Belt-Drive Turntable 33/45 (Mahogany)

The AT-LPW30 is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with black wood veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30 is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Product Features

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

Adjustable dynamic anti-skate control

Professional anti-resonance, die-cast aluminum platter with rubber mat

AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus

AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

Straight tonearm with hydraulically damped lift control and lockable rest

Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer

Built-in switchable phono pre-amplifier for phono or line-level output

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Wow and Flutter < 0.15% WRMS (33RPM) at 3kHz

Signal-to-Noise Ratio > 60dB

Output Level Pre-amp: PHONO: 4.0mV nominal at 1kHz, 5cm/sec - Pre-amp: LINE: 200mV nominal at 1kHz, 5cm/sec

Phono Pre-Amp Gain 35 dB nominal, RIAA equalized

Power Supply Requirements 100 to 240V, 50/60Hz

Dimensions 116.9 x 420.0 x 340.0 (H x W x Dmm)

Weight 5 kg

Tonearm Type Static balanced straight aluminum pipe tonearm

Effective Arm Length 223.6 mm

Overhang 18.6 mm

Tracking Error Angle <2 degrees

Applicable Cartridge Weight 12-17 g

Replacement Stylus AT-VMN95C

Notes Stylus pressure adjustment range: 0-3 g